We advise and help you in the design and creation process of your mold.

More than 40 years of experience in the sector has given us know-how that allows us to reduce the possibility of errors and increase the speed and profitability in the creation of any type of mold.

Injection molds for technical parts

Designed for the production of parts that have high technical requirements, such as mechanical resistance or close tolerances, with high-performance plastic materials.


Bimaterial injection molds

Complex systems for the production of 2K parts in different process variants such as rotating half-mold, internal rotation, retractable cores or robot translation.


Molds for household and household items

For the production of plastic parts with high standards of surface finish and aesthetic appearance.


Multi-cavity molds

For large production volumes both in conventional injection, as technical parts or bi-material (2K)


Prototype molds

Designed for the production of a limited number of parts in the final material and production process to carry out validation tests on the functionality of the parts and allowing changes to be incorporated in the molded geometry.

We accompany you throughout the entire process

From having the idea until it is implemented, a few steps are necessary in which Moltec's experience and knowledge will make the difference.

Starting from a simple concept, we will take care of its design, adaptation, approval and manufacturing so that your idea becomes a reality.
Contact now

Request your quote

Contact us and we will give you an assessment of the cost and time to carry out your project.
Contact now

Do you already have the mold or design?

We advise you for free on its implementation and the following approval, we analyze its viability and carry out the approval process for its subsequent use. 
If necessary, we help and advise you with the changes your design needs.
Discover more

Why Moltec?

We accompany you far beyond the mold

The creation of the mold is not the end, we make sure to follow up to increase its useful life and thus increase its useful life.

Fulfilled projects

Years of experience

Years working with Bi-Injection

Our projects

Cadersa – Conveyor belt wheel
Injection type
1K – Technical part
POM part
Post Process
See project
VW – Temperature hatch
Injection type
2K+PPA rod inserted into the mold
Translation by robot + rod inserted into the mold with robot Material 1st injection in PP T40 + Overmolding in TPE
Post Process
See project
Stellantis – Logo Citröen
Zanini Auto Group
Injection type
1K – Aesthetic piece
ABS part
Post Process
Chrome plated
See project
Discover all the projects

Request a quote

Fill out the following form and we will contact you to give you an estimated cost and time estimate.
Presupuesto tecnologia EN
About Us
Moldeo Técnico, S.A., born in 1975, we are dedicated to multi-component injection and mold design.
Learn more
Polígono Industrial Margarola SUD, C/Argila, 6 08292, Esparreguera, Barcelona, España.
+34 681 143 774
Offices Monday-Friday 9:00-14:00
Warehouse Monday-Friday 7:00-13:30 15:00-17:00